Swiss-Made Software

Invoicing software for tilers

Walls and floors per m², silicone joints per linear metre, extra prep work on the substrate as daywork: all on one QR-bill. For floor layers, parquet layers and grouting specialists too.

5'000+
Swiss self-employed
4.8★
App Store
30 sec.
First invoice in

What a tiling invoice looks like in Switzerland

A tiler bills in three units: surfaces in m², joints and skirting in linear metres, anything unexpected in hours. Here is the invoice for a bathroom renovation for a private client, who bought the tiles themselves. The prices are an example, not guide rates.

ItemDescriptionQtyRateAmount CHF
1Prime and level substrate9 m²28.00252.00
2Waterproofing membrane in shower area6 m²42.00252.00
3Lay wall tiles 30×60, incl. adhesive and grout22 m²118.002'596.00
4Lay floor tiles 60×60, incl. adhesive and grout5.5 m²125.00687.50
5Silicone joints at junctions and corners24 m14.00336.00
6Daywork: grind off old adhesive, not in quote (report of 3.11.)2 h92.00184.00
Subtotal4'307.50
VAT 8.1%348.91
Total incl. VAT4'656.41

Note on the invoice: "Tiles supplied by the client, not charged."

What belongs on your invoice:

  • Tile format and laying pattern in the line, for example 30×60 in a one-third offset. Your m² price depends on it.
  • What the m² price includes: adhesive, grout, cutting waste. Otherwise the client will ask.
  • Materials supplied by the client as a note, so it is clear you are not charging for the tiles.
  • Daywork listed separately, with the date of the work report and the reason for the extra work.
  • Site address and room, plus the order number on jobs for general contractors.
  • VAT number, rate and VAT amount if you are registered for VAT (Art. 26 para. 2 VAT Act).

A blank form to fill in is in the invoice template, and the matching quote in the quote template.

What costs money under the tiles

The area is measured in no time. The hard part is what only shows up once the old floor is out.

🕳️

The substrate fights back

Hollow spots in the screed, old adhesive, no fall to the drain. Without a work report and a word to the client, the extra work stays with you.
📏

Three units, one notepad

m² for the area, linear metres for joints and skirting, hours for daywork. On a notepad, one of them goes missing.
⏳

Waiting on the contractor

As a subcontractor you have paid for adhesive, membrane and often the tiles before the general contractor has even checked your invoice.
How it works

From measurements to QR-bill

Magic Heidi adds up m², linear metres and hours and puts the QR-bill underneath.

m², metres and pieces

Every line has a quantity and a price, decimals included, such as 5.5 m². You write the unit in the description.

  • Items such as "Lay wall tiles, per m²" saved
  • Silicone joints and skirting per linear metre
  • Surcharges for large format or diagonal laying as their own line
  • Note about client-supplied materials in the invoice text

Quote, deposit, final bill

You write the quote on your phone after the site visit. Before you order materials, you ask for a deposit.

  • Quote as a PDF with validity date and signature field
  • One click to the invoice, all lines kept
  • Deposit as a percentage with QR-bill
  • Deposit as a deduction line on the final invoice

Daywork, receipts, payments

Extra work on the substrate goes in as an hourly line. You photograph receipts from the tile supplier and the AI reads them.

  • Daywork hours with date, from–to and rate
  • Site and the contractor's order number in the header note
  • Automatic payment reminders for overdue invoices
  • Bank matching shows which invoice is paid

Rules for tilers and floor layers in Switzerland

Tiling: price per m², lump sum or daywork?

A price per m² or a lump sum for the whole bathroom is a fixed price: it binds you even if the work takes longer (Art. 373 Swiss Code of Obligations, CO). Without a fixed price, you bill according to the value of the work and your expenses (Art. 374 CO). So quote the surfaces per m² and state in the quote that work on the substrate that only becomes visible after strip-out will be billed as daywork (Regie).

Extra work on the substrate and tiles supplied by the client

If you find defects in the substrate or in tiles the client supplied, you must tell the client straight away. Otherwise you bear the consequences yourself (Art. 365 para. 3 CO). You handle client-supplied materials with care and return what is left (Art. 365 para. 2 CO). Put the notice in the work report or send it by email, with a date and a photo.

Tiler hourly rate in Switzerland: how it is built

There is no official hourly rate for tilers. Your daywork rate has to cover your wage and social security contributions, the hours for quotes and travel, your van, machines such as the wet saw and mixer, insurance and profit. You derive your m² price from it: time per m² times your hourly rate, plus adhesive, grout and cutting waste.

Laying and sanding parquet: show the costs clearly

Floor layers and parquet layers separate on the invoice what the client wants to compare: supplying the flooring, laying per m², skirting boards per linear metre, sanding and sealing or oiling per m². Preparation such as levelling compound or removing the old floor goes in as separate lines.

Collective labour agreements (CLA/GAV) for tilers and floor layers

According to SECO, the national CLA (L-GAV) for the tiling trade is declared generally binding until 31 December 2026. It does not cover the cantons of FR, BS, BL, VD, VS, NE, GE, TI and JU. The floor covering trade has its own CLA, which SECO lists as running until 31 December 2028. A CLA becomes relevant as soon as you employ people. Whether the tiling CLA has been extended for 2027 you can check in the CLA list on seco.admin.ch.

VAT net tax rate: 4.5%, 6.8% or 3.7%

From CHF 100'000 annual turnover you must register for VAT (MWST/TVA, Art. 10 para. 2 let. a VAT Act). If you use the net tax rate method, the Federal Tax Administration ordinance (in force since 1 January 2025) distinguishes:

ActivityNet tax rate
Tiling: supply with laying4.5%
Tiling: labour only (no materials)6.8%
Floor coverings / carpets: supply with laying3.7%
Parquet: supply with laying3.7%

If you lay partly with your own materials and partly labour-only as a subcontractor, each activity with more than 10% of turnover gets its own rate (Art. 86 VAT Ordinance). More in VAT for freelancers.

Liability for defects and standards

For work on buildings, since 1 January 2026 the client has 60 days to report defects, and 60 days from discovery for hidden defects (Art. 367 para. 1bis and Art. 370 para. 4 CO). Claims expire five years after acceptance of the work (Art. 371 CO). The SIA 248 standard "Tiling work", like every SIA contract standard, only applies if it was agreed. Technical guidance on laying is published by the association Ceruniq, formerly the Swiss tile association (Schweizerischer Plattenverband).

What Magic Heidi is for, and what it is not

Magic Heidi fits tilers, floor layers and grouting specialists who work alone or with a small team: bathroom renovations, kitchen splashbacks, parquet and vinyl in flats, re-grouting, subcontracting jobs. Quote, deposit, invoice, receipts and VAT are all in one place.

Magic Heidi is not built for taking measurements off plans, NPK bills of quantities, tile stock management or payroll for piece-rate workers. There is no offline mode for the basement with no signal. If you need that, construction software will serve you better.

Reviews

Paperwork done before the adhesive sets

Real reviews from self-employed people, each with a link to the source.

★★★★★
“No more stress with scraps of paper and receipts … In a very short time (something I’d usually put off for ages) I loaded 1.5 years of receipts and salary payments into Magic Heidi, and I’m thrilled.”
Meret FellerGoogle review · translated from German
★★★★★
“The first program that’s truly easy to use, even for office-challenged construction guys like me. The most user-friendly thing I’ve ever tried, and I bought it right away!”
Andy FischerGoogle review · Construction · translated from German
★★★★★
“Great service! My requests were implemented right away. Everything is simple and clearly laid out – it’s genuinely fun to work with Magic Heidi.”
Otto VogelGoogle review · translated from German

Try it free, then decide

All prices incl. VAT. Cancel any time.

Free

CHF 0/ month
Free forever
  • 3 invoices & 3 receipts (in total)
  • Quotes, deposits and QR-bill
  • All features unlocked
  • No credit card needed
Start for free

Monthly

CHF 39/ month
Cancel monthly
  • Same features
  • Same support by phone and email
  • Cancel any time
Start monthly

30-day money-back guarantee. No lock-in.

FAQ

Questions from tilers and floor layers

Which invoicing software suits a one-person tiling business?

You need software that adds up lines in m², linear metres and hours on one invoice, creates the QR-bill and runs on your phone. Magic Heidi does that, plus quotes, deposit invoices, receipt scanning and the VAT return with the net tax rate. For measurements from plans or NPK bills of quantities, construction software is the better choice.

How much does invoicing software for tilers cost?

Magic Heidi costs CHF 24.90 a month paid yearly (CHF 299 a year) or CHF 39 monthly, incl. VAT and with every feature. 3 invoices and 3 receipts are free, with no credit card. Paid plans come with a 30-day money-back guarantee. More on pricing.

How do I quote tiling work: per m², lump sum or daywork?

Surfaces you can measure you quote per m², with tile format, laying pattern and what the price includes. A fixed price binds you even if there is extra work (Art. 373 CO). What only shows up after strip-out, such as a substrate that needs levelling, you agree as daywork at your hourly rate plus materials (Art. 374 CO). In Magic Heidi both kinds of line sit on the same quote.

What is a tiler's hourly rate in Switzerland?

There is no official rate; it is up to you and the client to agree. It has to cover your wage, social security contributions, unbillable hours, van, machines, insurance and profit. Most tiling is billed per m²; the hourly rate comes in for daywork and repairs. The hourly rate calculator shows how to work out your own.

How do I bill silicone joints per linear metre?

As a separate line with the length as the quantity and the price per linear metre, for example "Replace silicone joints, 24 m". Removing the old joints and travel go on separate lines, often as a lump sum on small jobs. In Magic Heidi you save the line once as an item and from then on just enter the metres.

How do I invoice a general contractor as a subcontractor?

You send the general contractor an invoice with the site, their order number and the quantities in m² or linear metres, as agreed in the contract. Payment terms and deposits are a matter of contract, because without an agreement payment is only due on handover (Art. 372 CO). If you supply only labour without materials, the net tax rate for labour-only work is 6.8% instead of 4.5%.

Can I write my invoices in English?

Yes. You can issue quotes and invoices in English, and also in German, French, Italian or Romansh, so a client or contractor in Zurich, Lausanne or Lugano gets a document in their language. The QR-bill payment part is the same standard Swiss slip whatever the language.

Does the CLA for tilers or floor layers apply to me?

A collective labour agreement (CLA, GAV in German, CCT in French) sets the working conditions of employees and matters once you employ people. According to SECO, the national CLA for the tiling trade is generally binding until 31 December 2026, except in FR, BS, BL, VD, VS, NE, GE, TI and JU. The floor covering trade has its own CLA running until 31 December 2028. The current status is in SECO's CLA list.

How long is a tiler liable for defects?

For work on buildings, defect claims expire five years after acceptance, and this period cannot be shortened to the client's disadvantage (Art. 371 CO). The client must report defects within 60 days, and hidden defects within 60 days of discovery (Art. 367 para. 1bis and Art. 370 para. 4 CO). These rules apply since 1 January 2026.

How do I bill materials the client supplied?

You don't: client-supplied tiles appear as a note on the invoice, and you bill only the laying, adhesive and grout. If you spot defects in the tiles or the substrate, you must tell the client straight away, otherwise you bear the consequences (Art. 365 para. 3 CO). Any extra work that results is billed as daywork, as agreed with the client.

Measure, quote, get paid

Write your next tiling quote in Magic Heidi. 3 invoices and 3 receipts are free, no credit card needed.